Skip to main content
Lisle Corporation
Main Content
Just added to your cart:
Price: Quantity:
Merchandise Total:
Thumbnail View SelectedList View Not Selected
Per Page
Showing 1-54 of 54

Hangs the Disc Brake Caliper Out of the Way During Service While Keeping Tension Off the Brake Line.

The 9 Piece Manual Brake Gauge Set Allows Brake Pad Wear to be Accurately and Consistently Measured without Guessing.

Used to evacuate air from the power steering system after service work has been completed.

A Handy Set of 12 Brake Tools and Bag for Use When Servicing Many Drum Brake Applications.

One Tool Helps Make Installing New Pads on Front and Rear Brakes Quick and Easy. 

For Bleeding Air from Brake Cylinders with 8mm & 10mm Bleeder Screws.

For Bleeding Air from Brake Cylinders with 7mm & 9mm Bleeder Screws.

Double-Ended Adapter Features a 2 Pin Side and 3 Pin Side. Easily Adjustable and Used to Rewind Brake Pistons Back Into the Caliper.

Spring Hook.

Replaces Brake Shoes on Heavy-Duty Tractor and Trailer S-Cam Brakes.

Low Profile Design Allows Tubing to be Flared in Tight Spaces.

Extra Deep Alloy Steel 1-1/16" Socket Works on 30/36 Spring Brakes on 2016-2017 Freightliner Dump Trucks and Removes Other Types of Clamps and Bolts.

Stubby Design with Dual Drive Works in Tight Spots.

Nine Piece Triple Square (12 point) Bits to Fit 4, 5, 6, 8, 10, 12, 14, 16 and 18mm Sizes.

Works for Single and Double Flares, Also ISO (Bubble) Flares.

Works from the Top to Speed Star Wheel Adjusting on 2001-2006 Ford Taurus, Windstar and Mercury Sable and Other Drum Brakes with Top Mounted Adjuster.

Double-Ended Tool Speeds Star Wheel Adjusting on Ford F-150. Also Works on F-250/F-350 Super Duty Trucks with Dana 80 Rear Axles.

Speeds Star Wheel Adjusting.

Modified Bracket Now Fits 2007 Silverado/ Sierra Applications.

Smooth Nylon Action Cuts Tubing Quickly.

Quickly and Easily Release Tension on the Spring that Holds the Shoes Together on GM Vehicles Equipped with Drum Brakes.

Quickly Unlocks Truck Air Brakes.

Designed for Import Cars with Brake Shoe Hold-down Clips.

Fits Both Large and Small Washers.

Makes it Easy to Remove and Replace Springs.

Designed for Import Car Brake Return Springs.

Designed for Larger Brake Springs.

Quickly and Easily Pushes the Emergency Brake Cable Out of the Cable Connector for Rear Brake Service or Replacement.

Allows Technicians to Compress the Emergency Brake Cable Spring with One Hand.

Bends 3/16" Brake Lines Without Kinking or Flattening, Especially in Tight Spots.

Bends 1/4 Brake Lines Without Kinking or Flattening, Especially in Tight Spots.

For Ford Contour, Focus and Mercury Mystique.

Allows technician to remove parking brake cable by compressing the spring. 

For Removing and Installing 9mm Hex Brake Caliper Bolts. 

Makes Both Single and Double SAE Flares.

Nine Sizes for Brake Caliper Bolt Applications.

  A Quick Way to Spread Brake Pads and Compress Disc Brake Pistons for Pad Replacement on Single, Double & Quad Piston Calipers. 

Also Removes Truck Leaf Spring Bushings.

Rotates Piston Back Into the Caliper When Replacing Pads.

Includes sizes T-40, T-45, & T-50.

Compresses Dual Brake Pistons Simultaneously.

For Rotating Pistons Back into the Caliper to Provide Clearance for New Pads.

For Installing Pads on Most Domestic and Import Cars and Light Trucks.

Compresses Brake Pistons In Seconds.

Sold Two Per Set.

Cleans Rust from Brake Caliper Mounting and Other Surfaces.

For Servicing Disc Brakes.

Double Ended Tool for Removing and Installing Brake Springs.

5/16" x 3/8" Wrench for Bleeding Air From Brake Cylinders With Bleeder Screws.

1/4" x 3/8" Wrench for Bleeding Air From Brake Cylinders With Bleeder Screws.

2-Stone Hone Fits Cylinders 11/16" to 2 1/2" (17.4 - 63.5mm).

For 1 1/2" to 3 1/8" Disc Brake Cylinders (38.1 to 79.3mm).

3-Stone Hone Fits Cylinders to 2" (21.4-50.8mm).

© 2022 Lisle Corp. All rights reserved.