Skip to main content
Lisle Corporation
Main Content
Thumbnail View SelectedList View Not Selected
Page of 2
Per Page
Showing 1-36 of 53

For 1 1/2" to 3 1/8" Disc Brake Cylinders (38.1 to 79.3mm).

2-Stone Hone Fits Cylinders 11/16" to 2 1/2" (17.4 - 63.5mm).

5/16" x 3/8" Wrench for Bleeding Air From Brake Cylinders With Bleeder Screws.

1/4" x 3/8" Wrench for Bleeding Air From Brake Cylinders With Bleeder Screws.

For Bleeding Air from Brake Cylinders with 7mm & 9mm / 8mm & 10mm Bleeder Screws.

For Bleeding Air from Brake Cylinders with 7mm & 9mm / 8mm & 10mm Bleeder Screws.

Double Ended Tool for Removing and Installing Brake Springs.

For Servicing Disc Brakes.

Cleans Brake Caliper Mounting Surfaces.

Easily Remove and Install Wheels on Many European Vehicles with Lug Bolts.

To Easily Remove and Install Wheels on Fiat 500, Dodge Dart and Chrysler 200 Cars with Lug Bolts.

Sold Two Per Set.

Compresses Brake Pistons In Seconds.

For Installing Pads on Most Domestic and Import Cars and Light Trucks.

For Rotating Pistons Back into the Caliper to Provide Clearance for New Pads.

Compresses Dual Brake Pistons Simultaneously.

Includes sizes T-40, T-45, & T-50.

Rotates Piston Back Into the Caliper When Replacing Pads.

Also Removes Truck Leaf Spring Bushings.

  A Quick Way to Spread Brake Pads and Compress Disc Brake Pistons for Pad Replacement on Single, Double & Quad Piston Calipers. 

Nine Sizes for Brake Caliper Bolt Applications.

One Tool Helps Make Installing New Pads on Front and Rear Brakes Quick and Easy. 

Makes Both Single and Double SAE Flares.

For Removing and Installing 9mm Hex Brake Caliper Bolts. 

Allows technician to remove parking brake cable by compressing the spring. 

For Ford Contour, Focus and Mercury Mystique.

Bends 1/4 Brake Lines Without Kinking or Flattening, Especially in Tight Spots.

Bends 3/16" Brake Lines Without Kinking or Flattening, Especially in Tight Spots.

Allows Technicians to Compress the Emergency Brake Cable Spring with One Hand.

Quickly and Easily Pushes the Emergency Brake Cable Out of the Cable Connector for Rear Brake Service or Replacement.

Designed for Larger Brake Springs.

Designed for Import Car Brake Return Springs.

Makes it Easy to Remove and Replace Springs.

Fits Both Large and Small Washers.

Designed for Import Cars with Brake Shoe Hold-down Clips.

Previous
of 2
Showing 1-36 of 53
© 2019 Lisle Corp. All rights reserved.