For Ford Contour, Focus and Mercury Mystique.
Double-Ended Tool Speeds Star Wheel Adjusting on Ford F-150. Also Works on F-250/F-350 Super Duty Trucks with Dana 80 Rear Axles.
Works from the Top to Speed Star Wheel Adjusting on 2001-2006 Ford Taurus, Windstar and Mercury Sable and Other Drum Brakes with Top Mounted Adjuster.
Stubby Design with Dual Drive Works in Tight Spots.
Spring Hook.
Speeds Star Wheel Adjusting.
Sold Two Per Set.
Smooth Nylon Action Cuts Tubing Quickly.
Cleans Rust from Brake Caliper Mounting and Other Surfaces.
For Removing and Installing 9mm Hex Brake Caliper Bolts.
Hangs the Disc Brake Caliper Out of the Way During Service While Keeping Tension Off the Brake Line.
For Servicing Disc Brakes.
Allows technician to remove parking brake cable by compressing the spring.
1/4" x 3/8" Wrench for Bleeding Air From Brake Cylinders With Bleeder Screws.
For Bleeding Air from Brake Cylinders with 7mm & 9mm Bleeder Screws.
Simple to Use.
5/16" x 3/8" Wrench for Bleeding Air From Brake Cylinders With Bleeder Screws.
For Bleeding Air from Brake Cylinders with 8mm & 10mm Bleeder Screws.
Fits Both Large and Small Washers.
Rotates Piston Back Into the Caliper When Replacing Pads.
For Installing Pads on Most Domestic and Import Cars and Light Trucks.
Designed for Import Cars with Brake Shoe Hold-down Clips.
Designed for Import Car Brake Return Springs.
Includes sizes T-40, T-45, & T-50.
Makes it Easy to Remove and Replace Springs.
The 9 Piece Manual Brake Gauge Set Allows Brake Pad Wear to be Accurately and Consistently Measured without Guessing.
2-Stone Hone Fits Cylinders 11/16" to 2 1/2" (17.4 - 63.5mm).
3-Stone Hone Fits Cylinders to 2" (21.4-50.8mm).
Quickly Unlocks Truck Air Brakes.
Replaces Brake Shoes on Heavy-Duty Tractor and Trailer S-Cam Brakes. This tool is identical to the 40030, just has two extra holes drilled into it during the manufacturing process.
Designed for Larger Brake Springs.
For 1 1/2" to 3 1/8" Disc Brake Cylinders (38.1 to 79.3mm).
Allows Technicians to Compress the Emergency Brake Cable Spring with One Hand.
Nine Sizes for Brake Caliper Bolt Applications.
Double Ended Tool for Removing and Installing Brake Springs.
Quickly and Easily Pushes the Emergency Brake Cable Out of the Cable Connector for Rear Brake Service or Replacement.
Extra Deep Alloy Steel 1-1/16" Socket Works on 30/36 Spring Brakes on 2016-2017 Freightliner Dump Trucks and Removes Other Types of Clamps and Bolts.
Replaces Brake Shoes on Heavy-Duty Tractor and Trailer S-Cam Brakes.
Quickly and Easily Release Tension on the Spring that Holds the Shoes Together on GM Vehicles Equipped with Drum Brakes.
Bends 3/16" Brake Lines Without Kinking or Flattening, Especially in Tight Spots.
Bends 1/4 Brake Lines Without Kinking or Flattening, Especially in Tight Spots.
Double-Ended Adapter Features a 2 Pin Side and 3 Pin Side. Easily Adjustable and Used to Rewind Brake Pistons Back Into the Caliper.
Modified Bracket Now Fits 2007 Silverado/ Sierra Applications.
Used to evacuate air from the power steering system after service work has been completed.
Also Removes Truck Leaf Spring Bushings.
Compresses Brake Pistons In Seconds.
Nine Piece Triple Square (12 point) Bits to Fit 4, 5, 6, 8, 10, 12, 14, 16 and 18mm Sizes.
Compresses Dual Brake Pistons Simultaneously.
Makes Both Single and Double SAE Flares.
A Quick Way to Spread Brake Pads and Compress Disc Brake Pistons for Pad Replacement on Single, Double & Quad Piston Calipers.
Low Profile Design Allows Tubing to be Flared in Tight Spaces.
For Rotating Pistons Back into the Caliper to Provide Clearance for New Pads.
Works for Single and Double Flares, Also ISO (Bubble) Flares.
One Tool Helps Make Installing New Pads on Front and Rear Brakes Quick and Easy.
A Handy Set of 12 Brake Tools and Bag for Use When Servicing Many Drum Brake Applications.
Simultaneously Compresses Pistons on Quad Piston Hydraulic Disc Brakes Found on Medium-Duty Trucks and Trailers, Including Walther EMC Dura-Force Hydraulic Disc Brake Systems.