For 2017 Ford F-250, F-350 & F-450 Bed Bolts.
For Removing and Installing MORTORQ® Fasteners Found on Chrysler, GM, Jeep, and Other Models.
Heavy-Duty Impact Sockets Designed with More Than the Standard Socket Mass to Direct More Energy to Removing the Bolt.
Strong and impact resistant when used to pry against trim or metal body panels.
Helpful when removing any type of interior trim including door panels and dash pieces.
Designed to Remove Door Panels, Fascia and Trim Stripes, Dashboards, Interior Panels and Trim, Window Moldings, etc. in Vehicles.
For Use with a Pneumatic Impact Tool to Loosen Rusted or Seized Fasteners.
Six Lobed Spiral Bits are Designed to Remove Rounded or Stripped Fasteners with Internal Drive Heads.
Reversible Action for Both Internal and External Snap Rings. Smaller Design to Fit Tight Spaces.
For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.
For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.
Vinyl Holder with bits
Vinyl Holder
7mm Socket
5.5mm Socket
Toothless, Infinite Ratchet and Hinged Handle Design Make it Easier to Remove and Replace Fasteners on Small, Electric HVAC Motors.
Designed to Easily Remove and Install Clic® and Clic-R® Hose Clamps Found on Many European Vehicles.
80 Degree Angled Tips for Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.
45 Degree Angled Tips for Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.
Used to Replace the Spindle Snap Rings Found on 2007 and Newer Ford Super Duty Pickups.
For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.
Designed to Prevent Over Tightening Lug Nuts with a Torque Rating of 80 ft lbs.
*Superseded to #64180 Actuator Motor Wrench Set, 5 pc.
Toothless, Infinite Ratchet and Hinged Handle Design Make it Easier to Remove and Replace Fasteners on Small, Electric HVAC Motors.
External ratcheting snap ring pliers provide a secure lock on rings of various sizes.
Internal ratcheting snap ring pliers provide a secure lock on rings of various sizes.
20% Stronger than One-Piece Torx® Bits.
20% Stronger than One-Piece Torx® Bits.
Removes Studs from Engine Blocks, Exhaust Manifolds, Cylinder Heads and Other Applications.
For Use in Restricted Areas.
Stubby Design with Dual Drive Works in Tight Spots.
For 7/32" hex retaining bolts on Ford Ignition Module.
Use where a screwdriver won't fit.
A 9" flexible shaft with 1/4" square drive for starting and removing fasteners in hard-to-reach locations
A 9" flexible shaft with 3/8" square drive for starting and removing fasteners in hard-to-reach locations.
A SUPER STRONG extractor set made of a special hardened, shock-resistant tool steel.
Removes Broken Heater Hose Couplers.
Six Lobed Spiral Bits are Designed to Remove Rounded or Stripped Fasteners with Internal Drive Heads.
Spring Loaded Jaws Hold the Hog Ring During Use.
Spring Loaded Jaws Hold the Hog Ring During Use.
Nine Piece Triple Square (12 point) Bits to Fit 4, 5, 6, 8, 10, 12, 14, 16 and 18mm Sizes.
Triple Square (12 point) bits to fit 6, 8,10 and 12mm sizes; all on 1/2" hex drives.
For Use with a Pneumatic Impact Tool to Loosen Rusted or Seized Fasteners.
Special Socket Design Applies the Impact Force to the Center of the Frozen Bolt Through the Nose on the Pneumatic Driver.
Tool Removes Stuck Nuts 7/16" up to 3/4".
Reversible Action for Internal and External Applications.
A handy combination tool for internal and external snap rings.
For Removing and Installing All Types of Lock Rings.
Works Where an Impact Wrench Won't Fit.
Strong, Compact Design Saves Toolbox Space.
Strong, Compact Design Saves Toolbox Space.
Strong, Compact Design Saves Toolbox Space.
Comes in a Handy Storage Case.
Comes in a Handy Storage Case.
Comes in a Handy Storage Case.
Comes in a Handy Storage Case.
For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.
Removes Plastic Panel Fasteners.
Two-Piece Design for Greater Strength.
Removes Plastic Hold-Down Fasteners.
Seven Piece Set. 3/8" Square Drive.
For Removing and Installing 9mm Hex Brake Caliper Bolts.
Loosens Rusted or Frozen Screws Quickly...Manually.
Loosens Rusted, Frozen Nuts, Bolts and Screws.
Loosens Rusted, Frozen Nuts, Bolts and Screws.
Loosens Rusted, Frozen Nuts, Bolts and Screws.
Loosens Rusted, Frozen Nuts, Bolts and Screws.
For All Torque-to-Yield Fastener Applications.
For Electrical Ignition Switches On GM.
Quickly and Easily Disengages Jiffy-tite Quick-Connect Fittings Without Removal of the Retaining Clip.
The 6 piece set removes standard and metric bolts, nuts and studs from 1/4" to 9/16" (6mm to 14mm).
Seven Piece Set. 3/8" Square Drive.
Has 4 sizes.
Has 4 sizes.