Two-Piece Design for Greater Strength.
Removes Plastic Panel Fasteners.
For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.
For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.
For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.
Strong, Compact Design Saves Toolbox Space.
Strong, Compact Design Saves Toolbox Space.
Strong, Compact Design Saves Toolbox Space.
Works Where an Impact Wrench Won't Fit.
Tool Removes Stuck Nuts 7/16" up to 3/4".
Special Socket Design Applies the Impact Force to the Center of the Frozen Bolt Through the Nose on the Pneumatic Driver.
Six Lobed Spiral Bits are Designed to Remove Rounded or Stripped Fasteners with Internal Drive Heads.
A 9" flexible shaft with 3/8" square drive for starting and removing fasteners in hard-to-reach locations.
A 9" flexible shaft with 1/4" square drive for starting and removing fasteners in hard-to-reach locations
Stubby Design with Dual Drive Works in Tight Spots.
20% Stronger than One-Piece Torx® Bits.
20% Stronger than One-Piece Torx® Bits.
Internal ratcheting snap ring pliers provide a secure lock on rings of various sizes.
Vinyl Holder
5.5mm Socket
7mm Socket
For 7/32" hex retaining bolts on Ford Ignition Module.
Comes in a Handy Storage Case.
Removes Broken Heater Hose Couplers.
For Removing and Installing 9mm Hex Brake Caliper Bolts.
Comes in a Handy Storage Case.
Comes in a Handy Storage Case.
Comes in a Handy Storage Case.
For Electrical Ignition Switches On GM.
Quickly and Easily Disengages Jiffy-tite Quick-Connect Fittings Without Removal of the Retaining Clip.
Removes Plastic Hold-Down Fasteners.
For 2017 Ford F-250, F-350 & F-450 Bed Bolts.
Designed to Easily Remove and Install Clic® and Clic-R® Hose Clamps Found on Many European Vehicles.
For Removing and Installing All Types of Lock Rings.
A handy combination tool for internal and external snap rings.
Triple Square (12 point) bits to fit 6, 8,10 and 12mm sizes; all on 1/2" hex drives.
Has 4 sizes.
Use where a screwdriver won't fit.
45 Degree Angled Tips for Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.
80 Degree Angled Tips for Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.
For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.
A SUPER STRONG extractor set made of a special hardened, shock-resistant tool steel.
For Removing and Installing MORTORQ® Fasteners Found on Chrysler, GM, Jeep, and Other Models.
Has 4 sizes.
Reversible Action for Both Internal and External Snap Rings. Smaller Design to Fit Tight Spaces.
Seven Piece Set. 3/8" Square Drive.
Seven Piece Set. 3/8" Square Drive.
Spring Loaded Jaws Hold the Hog Ring During Use.
Spring Loaded Jaws Hold the Hog Ring During Use.
Vinyl Holder with bits
Loosens Rusted, Frozen Nuts, Bolts and Screws.
Loosens Rusted, Frozen Nuts, Bolts and Screws.
Heavy-Duty Impact Sockets Designed with More Than the Standard Socket Mass to Direct More Energy to Removing the Bolt.
Designed to Remove Door Panels, Fascia and Trim Stripes, Dashboards, Interior Panels and Trim, Window Moldings, etc. in Vehicles.
Strong and impact resistant when used to pry against trim or metal body panels.
Removes Studs from Engine Blocks, Exhaust Manifolds, Cylinder Heads and Other Applications.
Six Lobed Spiral Bits are Designed to Remove Rounded or Stripped Fasteners with Internal Drive Heads.
For Use in Restricted Areas.
Loosens Rusted or Frozen Screws Quickly...Manually.
The 6 piece set removes standard and metric bolts, nuts and studs from 1/4" to 9/16" (6mm to 14mm).
*Superseded to #64180 Actuator Motor Wrench Set, 5 pc.
Toothless, Infinite Ratchet and Hinged Handle Design Make it Easier to Remove and Replace Fasteners on Small, Electric HVAC Motors.
Helpful when removing any type of interior trim including door panels and dash pieces.
For Use with a Pneumatic Impact Tool to Loosen Rusted or Seized Fasteners.
Loosens Rusted, Frozen Nuts, Bolts and Screws.
Loosens Rusted, Frozen Nuts, Bolts and Screws.
Reversible Action for Internal and External Applications.
Used to Replace the Spindle Snap Rings Found on 2007 and Newer Ford Super Duty Pickups.
Nine Piece Triple Square (12 point) Bits to Fit 4, 5, 6, 8, 10, 12, 14, 16 and 18mm Sizes.
External ratcheting snap ring pliers provide a secure lock on rings of various sizes.
For All Torque-to-Yield Fastener Applications.
Toothless, Infinite Ratchet and Hinged Handle Design Make it Easier to Remove and Replace Fasteners on Small, Electric HVAC Motors.
Designed to Prevent Over Tightening Lug Nuts with a Torque Rating of 80 ft lbs.
For Use with a Pneumatic Impact Tool to Loosen Rusted or Seized Fasteners.