Skip to main content
Lisle Corporation
Main Content
Just added to your cart:
Price: Quantity:
Merchandise Total:
Thumbnail View SelectedList View Not Selected
Per Page
Showing 1-74 of 74

Seven Piece Set. 3/8" Square Drive.

The 6 piece set removes standard and metric bolts, nuts and studs from 1/4" to 9/16" (6mm to 14mm).

Quickly and Easily Disengages Jiffy-tite Quick-Connect Fittings Without Removal of the Retaining Clip.

For Electrical Ignition Switches On GM.

For All Torque-to-Yield Fastener Applications.

Loosens Rusted, Frozen Nuts, Bolts and Screws.

Loosens Rusted, Frozen Nuts, Bolts and Screws.

Loosens Rusted, Frozen Nuts, Bolts and Screws.

Loosens Rusted, Frozen Nuts, Bolts and Screws.

Loosens Rusted or Frozen Screws Quickly...Manually.

Seven Piece Set. 3/8" Square Drive.

For Removing and Installing 9mm Hex Brake Caliper Bolts. 

Removes Plastic Hold-Down Fasteners.

Comes in a Handy Storage Case.

Comes in a Handy Storage Case.

Comes in a Handy Storage Case.

Comes in a Handy Storage Case.

For Hard-to-Reach, Hard-to-See Hex Socket Screws.

For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.

For Removing and Installing All Types of Lock Rings.

A handy combination tool for internal and external snap rings.

Reversible Action for Both Internal and External Snap Rings. Smaller Design to Fit Tight Spaces.

Reversible Action for Internal and External Applications.

For Use with a Pneumatic Impact Tool to Loosen Rusted or Seized Fasteners.

Triple Square (12 point) bits to fit 6, 8,10 and 12mm sizes; all on 1/2" hex drives.

Nine Piece Triple Square (12 point) Bits to Fit 4, 5, 6, 8, 10, 12, 14, 16 and 18mm Sizes.

Spring Loaded Jaws Hold the Hog Ring During Use.

Spring Loaded Jaws Hold the Hog Ring During Use.

Six Lobed Spiral Bits are Designed to Remove Rounded or Stripped Fasteners with Internal Drive Heads.

Removes Broken Heater Hose Couplers.

A SUPER STRONG extractor set made of a special hardened, shock-resistant tool steel.

*Superseded to #64180 Actuator Motor Wrench Set, 5 pc.

Toothless, Infinite Ratchet and Hinged Handle Design Make it Easier to Remove and Replace Fasteners on Small, Electric HVAC Motors.

Use where a screwdriver won't fit.

For 7/32" hex retaining bolts on Ford Ignition Module.

Helpful when removing any type of interior trim including door panels and dash pieces.

Strong and impact resistant when used to pry against trim or metal body panels.

For Use in Restricted Areas.

Removes Studs from Engine Blocks, Exhaust Manifolds, Cylinder Heads and Other Applications.

For Removing and Installing MORTORQ® Fasteners Found on Chrysler, GM, Jeep, and Other Models.

80 Degree Angled Tips for Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.

For 2017 Ford F-250, F-350 & F-450 Bed Bolts.

Designed to Easily Remove and Install Clic® and Clic-R® Hose Clamps Found on Many European Vehicles.

45 Degree Angled Tips for Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.

Used to Replace the Spindle Snap Rings Found on 2007 and Newer Ford Super Duty Pickups.

Strong, Compact Design Saves Toolbox Space.  

Strong, Compact Design Saves Toolbox Space.

Strong, Compact Design Saves Toolbox Space.

For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.

For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins. 

For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins. 

Designed to Prevent Over Tightening Lug Nuts with a Torque Rating of 80 ft lbs.

Tool Removes Stuck Nuts 7/16" up to 3/4".

Two-Piece Design for Greater Strength.

Special Socket Design Applies the Impact Force to the Center of the Frozen Bolt Through the Nose on the Pneumatic Driver.

Six Lobed Spiral Bits are Designed to Remove Rounded or Stripped Fasteners with Internal Drive Heads.

For Use with a Pneumatic Impact Tool to Loosen Rusted or Seized Fasteners.

A 9" flexible shaft with 1/4" square drive for starting and removing fasteners in hard-to-reach locations

A 9" flexible shaft with 3/8" square drive for starting and removing fasteners in hard-to-reach locations.  

Internal ratcheting snap ring pliers provide a secure lock on rings of various sizes.

External ratcheting snap ring pliers provide a secure lock on rings of various sizes.

Designed to Remove Door Panels, Fascia and Trim Stripes, Dashboards, Interior Panels and Trim, Window Moldings, etc. in Vehicles.

Stubby Design with Dual Drive Works in Tight Spots.

Heavy-Duty Impact Sockets Designed with More Than the Standard Socket Mass to Direct More Energy to Removing the Bolt.

20% Stronger than One-Piece Torx® Bits.

20% Stronger than One-Piece Torx® Bits.

Toothless, Infinite Ratchet and Hinged Handle Design Make it Easier to Remove and Replace Fasteners on Small, Electric HVAC Motors.

Vinyl Holder with bits

© 2024 Lisle Corp. All rights reserved.