Low Profile, 6 Point Wrench with Offset 3/8" Square Drive for Clearance in Hard-to-Reach Spaces.
Use on oil and fuel filter canisters when replacing the element. Size is laser marked on each wrench with a blow-molded case for storage.
If using a torque wrench with these adapters, adjust the torque setting to compensate for any change in length between the center line of the fastener and the center line of the torque wrench drive. The torque setting will be the same if you put the offset wrench at 90 degrees to the handle of the torque wrench.
|24mm for Cadillac and some BMW
|25mm for Fleetguard Filter on Motorhomes, Buses, and Some Medium Size Trucks with Cummins Engine. Also Some K&N Filters
|27mm for 2003 and later Mercedes 1.8L, Smart and some VW
28mm for 2010-2018, 6.7L Dodge Cummins Fuel Filter Canister
29mm (1-1/8") for Dodge Cummins Fuel Filter Housing
|32mm (1-1/4") for GM Ecotec, 2.0L, 2.2L and 2.4L Four Cylinder Oil Filter Housing; Some Saturn & Saab
36mm for Ford 6.0L Diesel Fuel and Oil Filter Housings, Mini Cooper and some BMW Oil Filter Housings, and Mack Truck Oil Filter Housing
|Case for 40600