Easily Remove and Install Wheels on Many European Vehicles with Lug Bolts.
Use this heavy-duty drain to drain large capacity crank cases or radiator systems.
Fits Threaded Plastic Radiator Caps on Newer GM Engines.
Durable, Heavy Duty.
Shines Where Other Lights Can't!
Removes Small Center Hub Caps Without Scratching or Damaging the Wheel.Removes Small Center Hub Caps Without Scratching or Damaging the Wheel.
Strong, Compact Design Saves Toolbox Space.
Strong, Compact Design Saves Toolbox Space.
Strong, Compact Design Saves Toolbox Space.
Cuts Metal Tubing up to 1-1/8" O.D.
Tool Removes Stuck Nuts 7/16" up to 3/4".
Easily Release SIR Module Retention Springs on GM Cars, Minivans and Light Trucks.
Special Socket Design Applies the Impact Force to the Center of the Frozen Bolt Through the Nose on the Pneumatic Driver.
2 pc wrench set comes in two lengths and with a vinyl holder. Used to open and close petcocks in radiators and any petcock that the wrench will fit.
A Toothless, Infinite Ratchet Housed in a Reversible Anodized Aluminum Body.
A 9" flexible shaft with 3/8" square drive for starting and removing fasteners in hard-to-reach locations.
A 9" flexible shaft with 1/4" square drive for starting and removing fasteners in hard-to-reach locations
Mini Magnetic light is compact to fit into tight areas where standard flashlights will not.
With More Plastic Found Inside Vehicles, the OBD II Splitter with Power & Ground Provides an Easy Way to Find a Ground for Testing.
Flexible Magnetic Holder Provides a Third Hand. Bright, Rechargeable Flashlight Will Run All Day.
Flexible, Magnetic Holder Works like a Third Hand.
Handy Six Piece Set Includes Hook Pick, Combination Pick, Straight Pick, 90° Pick, O-Ring Pick, Angle Hook Pick and Quick Release Handle.
Great for Use Anywhere that Needs a Little Freshening Up.
Great for Use Anywhere that Needs a Little Freshening Up.
Replacement Tips x2
Great for Use Anywhere that Needs a Little Freshening Up.
Paint Protector
Vinyl Holder for 70700
Punch for Flip Socket Set
Curved Wedge
Socket #2 Plus
Socket #3 Plus
1/2" Extension, 3"
Socket #6 Minus
Disconnects Ford Hydraulic Clutch Lines.
1/8" Pry Bar with Magnet.
3/16" Pry Bar
Ideal for Marking Most Metal and Softer Material Surfaces.
Combination Wedge x2
Extension, 1/2"
Quickly Removes and Installs "O" Rings and Seals.
Detects Combustion Leaks on Engines.
Pocket Sized Pry Bar with Many Vehicle Applications and Features a Strike Cap.
Smooth Nylon Action Cuts Tubing Quickly.
7" Tip Rod, Glow
Case for 13050
Enables You To See Around Corners.
10" Tall Translucent Funnel with a 6-3/4" Offset from Center of Mouth to Center of Spout for Hard-to-Reach Applications.
Removes the Driver Side Airbag with Wire Spring Clips.
Heat-Treated Steel Tip for Removing and Installing Standard Valve Cores.
Hex & Twist Socket, 17mm
Removes the pivot pin on GM, Ford and Chrysler tilt and telescoping Saginaw steering columns.
Pocket Sized Pry Bars with Many Vehicle Applications.
Hex & Twist Socket, 18mm
Hex & Twist Socket, 19mm
Disengages Retaining Clips on Fords & Imports.
Abrasive Loop
Ideal for Holding Round and Hex Parts Securely.
Works Great for Removing Hoses, Moldings, Clips, Clamps, Seals, O-Rings, Cotter Pins, and Gaskets.
18.5mm/19.55mm Socket
Comfortable Crew Socks Made from Super Soft Bamboo Fibers.
Hex & Twist Socket, 21mm
17mm/17.5mm Socket
19mm/19.5mm Socket
Protects Arms from Burns While Working Around the Engine.
Hex & Twist Socket, 22mm
21mm/21.5mm Socket
Mesh Hat, Black
19mm/21mm Socket Thin Wall
22mm/22.5mm Socket
To Easily Remove and Install Wheels on Fiat 500, Dodge Dart and Chrysler 200 Cars with Lug Bolts.
Holds Gas Charged Lift Supports Up to 9/16", Found On Hoods, Tailgates, Hatchbacks and Trunks. Neodymium Magnet Holds the Tool in Place While Securing the Clamp.
Bottom Rod, Glow
Offers an Extra Pair of Hands When Soldering.
Removes And Installs Valve Cores And Valve Core Caps.
Automatic Firing Action.
Case for 12950
16mm x 1.5 Threads to Easily Remove and Install Wheels on Dodge ProMaster with Lug Bolts.
For Protecting Delicate Parts.
27mm/27.5mm Socket
Tool is Designed for Slitting the Outer Sheath of Wire Loom Without Damaging Inner Wires.
Disengages the line from Jiffy-tite quick connect fittings without removal of the clip.
Quickly evacuates air from tires without removing valve core.
Universal Magnetic Can Holder for Cans or Bottles up to 3-3/8" in Diameter.
Hex & Twist Socket, 24mm
Flexible Light Holder Works Like a Third Hand. Powerful 2" Diameter, 50 lb. Pull Magnet Allows a Light to be Conveniently Located.
No Splatter Pad and Steel Supports Protect Work Area From Messy Oil Splatter.
Top Rod, Glow
Case for 72600
Securely Attaches to Ferrous Metal Surfaces Like Spray Booth Walls, Mixing Room Walls, Workstation Cabinets and More.
Loosen or Tighten Cylindrical or Rectangular Objects.
Air Wedge
12530 Line Socket, 17mm
Total Hand and Arm Burn Protection.
Features a Strong Magnetic Base that Attaches Securely to Vehicles, Tool Boxes, Bins, Hoists and any Other Ferrous Metal Object.
Reversible Action for Both Internal and External Snap Rings. Smaller Design to Fit Tight Spaces.