3" O.D. Socket is Used to Remove and Install the Hub Nut on 2021 and Newer Chevrolet Silverado and GMC Sierra With 11-1/2" or 12" Dual Rear Wheel Axle Hubs.
2-5/8" O.D. Socket is Used to Remove and Install the Hub Nut on 2021 and Newer Chevrolet Silverado and GMC Sierra With 11-1/2" or 12" Single Rear Wheel Axle Hubs.
2-1/2" O.D. Socket is Used to Remove and Install the Hub Nut on 2021 and Newer Chevrolet Express and GMC Savana With 10-1/2" Dual Rear Wheel Axle Hubs.
Safely and Easily Remove Brake Anchor Pins and Bushings at the Same Time on Most 16-1/2" S-Cam Trailer and Tractor "Q" Brake Systems Found on Class 6-8 Trucks and Equipment.
33mm Twist Socket
33mm Hex Socket
Two-Piece Hex and Twist Socket Set is Used for Installation and Removal of Normal, Damaged or Corroded Lug Nuts Found on Some Class 6 & 7 and Most Class 8 Trucks.
Easily Removes and Installs Rear Drum Brake Return Springs.
Easily Removes and Installs Brake Shoe Anchor Springs on Eaton Air Brakes.
Interchangeable Heavy-Duty Cleaning Wands for Radiators and Other Hard-To-Reach Places. Fast and Easy Cleaning Wands for Use with Water or Air.
Spring-Loaded Plunger Automatically Centers the Press on the Brake Clevis Pin, for Easy Removal.
Spring-Loaded Plunger Automatically Centers the Press on the Slack Adjuster Rod Clevis Pin, For Easy Removal.
Fully Heat-treated, High-strength Cast Steel Tools for Removing Stubborn Pitman Arms.
Fully Heat-treated, High-strength Cast Steel Tools for Removing Stubborn Pitman Arms.
Fully Heat-treated, High-strength Cast Steel Tools for Removing Stubborn Pitman Arms.
Pocket Sized Pry Bar with Many Vehicle Applications and Features a Strike Cap.
Easily Removes and Replaces the S-Cam Return Spring.
Used to Remove Commercial Heavy-Duty Yokes on Transmissions and Rear-End Differentials Without Damage to Yokes or Other Components.
Wrench Loosens the Plastic Retaining Ring on AGCO and John Deere Diesel Fuel Filter Canisters.
Water and Air Cleaning In One Wand for High Efficiency Cooling Systems on Large Industrial Equipment.
Replaces Brake Shoes on Heavy-Duty Tractor and Trailer S-Cam Brakes.
Replaces Brake Shoes on Heavy-Duty Tractor and Trailer S-Cam Brakes. This tool is identical to the 40030, just has two extra holes drilled into it during the manufacturing process.
Quickly and Easily Removes Sealed U-Joint Caps without Damage to Driveshafts, Yokes or Bearing Caps.
The 9 Piece Manual Brake Gauge Set Allows Brake Pad Wear to be Accurately and Consistently Measured without Guessing.