Skip to main content
Lisle Corporation
Main Content

New Products

Just added to your cart:
Price: Quantity:
Merchandise Total:
Thumbnail View Not SelectedList View Selected
Per Page
Showing 1-94 of 94

Time Saving Tool That Safely Removes Frozen Hub Assemblies Without Damaging Other Suspension Components.

Securely Attaches to Ferrous Metal Surfaces Like Spray Booth Walls, Mixing Room Walls, Workstation Cabinets and More.

Replaces Brake Shoes on Heavy-Duty Tractor and Trailer S-Cam Brakes.

Double-Ended Adapter Features a 2 Pin Side and 3 Pin Side. Easily Adjustable and Used to Rewind Brake Pistons Back Into the Caliper.

No Splatter Pad and Steel Supports Protect Work Area From Messy Oil Splatter.

Removes Broken Exhaust Manifold Bolts on Ford 3.5L Ecoboost Motors Without Damaging the Cylinder Head.

Designed to Remove Fasteners on Door Panels and Other Trim Pieces on a Vehicle Without Damage.

This Heavy-Duty Impact Socket is Designed with More Than Three Times the Standard Socket Mass to Direct More Energy to Removing the Bolt.

Seats the Rope Under the Lip and Into Groove of the Windshield Gasket.

Rigid Stainless-Steel Blade Extends Through The Handle to the Metal Capped End for Strength And Durability

Rigid Stainless-Steel Blade Extends Through The Handle to the Metal Capped End for Strength And Durability.

Rounded and Polished Steel Tip slides the Self-Locking Part of the Rubber Gasket Into the Locking Channel

Designed to Remove Gasket Residue from Steel and Aluminum Heads and Manifolds, Along with Carbon Build-Up and Even Rust.

Gives a Visual Check of Spark Energy for Coil On Plug or Standard Ignition Systems.

For Use On Any Application with a Gasket Seal such as Oil Pans, Transmission Pans and Differential Covers.

Compact Utility Knife with an Ergonomic Comfort Grip to Be Used On Various Jobs.

Set Includes Two Wire Gripping Handles for Cutting Auto Glass Urethane.

Fiber Wire for Use with 83080 Wire Handle Puller Set, 2 pc. to Cut Auto Glass Urethane.

Flexible Tool Shaft Follows the Contour of the Bottom of the Door to Help Move Broken Glass to an Area Where It Can Be Removed.

M2 High Speed Steel Drill Bits.

Detailing Brush or Bucket Brush

Self-cleaning flow-thru washer brush

Hardened Steel Plates are Wire and Spot Welded for Strength.

24" Flexible Cable Allows Access to Clamps Difficult to Reach with Other Tools.

The adapter securely holds the funnel in place for safe and spill-free filling on 2011 to 2019 Duramax Vehicles. Also Works on Side Fill Vehicles.

For Use When Servicing the Timing Chain on 2017 and Newer Ford V6 3.5L Turbo Engines.

19.75" Long Tool is Great to Reach Upholstery Clips in the Middle of a Door Panel.

The 14-1/2" 21mm/24mm Wrench can be Used to Move Hard-to-Reach and Often Rusty OEM Cams on 1999 and Newer GM 1/2 and 3/4 Ton Vehicles with Coil Spring Front Suspensions.

Adjustable Pressure Industrial Spray Gun with Air Adapter and a Stepped Tip Design for Easy Heater Core Flushing.

Used to Replace Seals in Valve Covers on Honda® 2.4 and 3.5L Engines.

Designed to Replace Fuel Line Fittings Without Damage to Fitting, Fuel Rail, and Fuel Line Reducing the Possibility of Fuel Leaks.

Works on a Wide Range of Foreign and Domestic Vehicle Mirrors.

Simply Slide the 2-Prong Tool into the Bracket with Gentle Upward Pressure While Moving the Tool Side-To-Side, the Mirror will Disconnect.

Designed to Safely Cut Fiber Line from Spools for Auto Glass Removal.

Rounded and Polished Steel Tip Slides the Self-Locking Part of the Rubber Gasket Into the Locking Channel.

The Low Profile Design with 45° Bend Disconnects Fuel Line, EVAP Line Fittings and DEF Fittings in Hard-to-Reach Areas.

Designed to Remove Gasket Residue from Steel and Aluminum Heads and Manifolds, Along with Carbon Build-Up and Even Rust.

Accurately Lines Up and Holds Cams for Proper Timing Chain Alignment on Honda® K-Series Engines.

Double Ended Disconnect Tool Works on Plastic Quick-Connect Fittings on the High- and Low-Pressure Air Conditioning Lines on Most 1998 and Newer Toyota Vehicles.

15" Wide Funnel Fits into the Aluminum Adapter Which Fits Any 2" NPT Bung.

Cleans Threads in Soot Sensor Holes.

Allows the Engine Crank to Be Manually Adjusted.

A Straightforward Relay Tester That Will Easily And Quickly Test Most 12 And 24 Volt DC Automotive Relays.

Removes Broken Exhaust Manifold Bolts On (2000 - 2007) Dodge® 4.7L Motors Without Damaging the Cylinder Head.

Ergonomic curved design makes pliers easy to use in hard-to-reach areas.

Cross-cut tip design grips most hose clamps from multiple angles.

For Use When Servicing the Timing Chain on GM 2.8, 2.9, 3.0, 3.5, 3.6, 3.7, and 4.2L Engines. Helps Ensure Camshaft Alignment During Timing Chain Removal and Installation.

Five Larger Sizes in a Convenient Set

Removes and Installs Belts on Serpentine Belt Systems Using the Spring Loaded Idler Pulley.

Releases Tension on Serpentine Belts With a Spring Loaded Idler Pulley.

Heat-Treated Arms with Specially Designed Gripping Jaws Grab Even the Most Stubborn Filters.

Designed to Remove Broken Glass Remnants from Glass Channels in Vehicle Doors.

Thin Wall, 16mm, 12 pt. Socket with Swivel to Remove and Replace Spark Plugs from Narrow Tubes.

Removes and Slits Insulation on Single and Multiple Conductor Cables up to 1.25" OD.

Designed to Prevent Over Tightening Lug Nuts with Torque Ratings of 100-120 ft lbs.

 Collet expand pipes up to 5" including stainless steel. 

Compact 5" Wrench Provides 100% Engagement on the Fuel Filter Collar.

Compact 6" Wrench Provides 100% Engagement on the Fuel Filter Collar.

Compact 8" Wrench Provides 100% Engagement on the Fuel Filter Collar.

Double Ended Wrench Removes Vent Cap on Top of Davco Chassis Mounted Fuel Filter System Canisters.

Compact Wrench Provides 100% Engagement on the Fuel Filter Bowl.

Works on 2001 and Newer Duramax Engines to Turn the Crankshaft Allowing Access to the Torque Converter Bolts.

The 9 Piece Manual Brake Gauge Set Allows Brake Pad Wear to be Accurately and Consistently Measured without Guessing.

Quickly and Easily Removes Sealed U-Joint Caps without Damage to Driveshafts, Yokes or Bearing Caps.

11 Point Socket for Air Disc Brake Caliper Adjustment.

Improved Socket Design to Work on Longer Applications.

Can be Attached to Most Toolboxes, Benches or Walls, Keeping a Creeper Off the Floor and Stored in One Location.

Removes Broken Exhaust Manifold Bolts Without Damaging the Head.

45 Degree Angled Tips for Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.

80 Degree Angled Tips for Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.

Designed to Easily Remove and Install Clic® and Clic-R® Hose Clamps Found on Many European Vehicles.

Strong and Impact Resistant when Used to Pry Against Trim or Metal Body Panels.

Quickly and Easily Removes Sealed U-Joint Caps without Damage to Driveshafts, Yokes or Bearing Caps.

Quickly and Easily Removes Sealed U-Joint Caps without Damage to Driveshafts, Yokes or Bearing Caps.

Easily Removes Mirrors Held on By Spring Clip Without Damage to the Windshield or Mirror.

Heavy-Duty Tester Signals with a Light and a Buzzer.

Safely and Easily Remove Plastic Oil Pan Drain Plugs Found on Many Late Model Audi, BMW, Ford and Volkswagen without Damage to the Plug.

Holds up to 13 Tools, Including Pry Bars, Extensions and Air Tools.

Features a Mechanism for Clamping without Springs or Any Manual Adjustments.

Features a Mechanism for Clamping without Springs or Any Manual Adjustments.

Narrow Tip with V Groove for Removing Plastic Clips Used on Upholstery, Door Panels, Radiator Shrouds, Fender Liners and Weather Stripping.

Flat flow-thru parts washer brush with valve

Flat flow-thru parts washer brush

Ergonomic flow-thru washer brush with valve

Ergonomic self-cleaning flow-thru washer brush with valve

Ergonomic flow-thru washer brush

Ergonomic parts cleaning brush

Ergonomic self-cleaning flow-thru parts washer brush

© 2022 Lisle Corp. All rights reserved.