Compound Joint Handle Design and 13-1/2" Tool Length Provides Extra Reach for Connectors in Hard-To-Reach Spots.
Angled Tips for Easier Access to Hard-to-Reach Connectors. Removes Many Single and Double Connectors Found on Many Cars, Trucks and Heavy-Duty Vehicles.
Used for Replacing Teflon Seals on Most Hitachi, Bosch, Continental and Delphi Fuel Injectors Found on Many Ford, GM and Subaru Engines.
Separates Rusted, Frozen or Seized Dual Wheels on Many Trucks, Buses, Vans, RVs or Trailers.
2-1/2" O.D. Socket is Used to Remove and Install the Hub Nut on 2021 and Newer Chevrolet Express and GMC Savana With 10-1/2" Dual Rear Wheel Axle Hubs.
2-5/8" O.D. Socket is Used to Remove and Install the Hub Nut on 2021 and Newer Chevrolet Silverado and GMC Sierra With 11-1/2" or 12" Single Rear Wheel Axle Hubs.
3" O.D. Socket is Used to Remove and Install the Hub Nut on 2021 and Newer Chevrolet Silverado and GMC Sierra With 11-1/2" or 12" Dual Rear Wheel Axle Hubs.
Narrow Head Diameter for Tight Clearance Bolts.
Master Tool Kit Provides Several Options to Get Into Most Vehicles Quickly and Effectively
Includes Tools Needed to Get Into Most Vehicles Quickly and Effectively
Basic Tool Kit Includes the Essentials Needed to Get Into Most Vehicles Quickly and Effectively
Works on 2011 and Newer Chrysler, Dodge and Jeep Vehicles to Lock Cam Phasers in Place and Release Tension on the Timing Chain for Service.
Double-Ended Flip Sockets Offer 2 Hex Sizes in Each Socket for the Removal of Standard and Damaged/Distorted Lug Nuts.
Safely and Easily Remove Brake Anchor Pins and Bushings at the Same Time on Most 16-1/2" S-Cam Trailer and Tractor "Q" Brake Systems Found on Class 6-8 Trucks and Equipment.
A Pocket-Sized Version of the Classic Plastic Fastener Remover.
Includes Three Sizes for Non M.T.C.I. Taps.
Used for Installation and Removal of Normal, Damaged or Corroded Nuts.
Simultaneously Compresses Pistons on Quad Piston Hydraulic Disc Brakes Found on Medium-Duty Trucks and Trailers, Including Walther EMC Dura-Force Hydraulic Disc Brake Systems.
Three Adapters Turn Any 3/8" Drive Ratchet or Breaker Bar into a 25, 35 or 40 Newton-Meter Torque Wrench.
Two-Piece Hex and Twist Socket Set is Used for Installation and Removal of Normal, Damaged or Corroded Lug Nuts Found on Some Class 6 & 7 and Most Class 8 Trucks.
Removes and Installs DEF Canister Filters on Many Class 6-8 Trucks.
Tool is Designed for Slitting the Outer Sheath of Wire Loom Without Damaging Inner Wires.
Universal Magnetic Can Holder for Cans or Bottles up to 3-3/8" in Diameter.
Removes Many Single and Double Connectors Found on Many Cars, Trucks and Heavy-Duty Vehicles.
The Kit Includes 5 Cam Adjusting Holding Tools to Adjust the Control Arm Cams Found on Chevrolet and GMC Vehicles.
The Socket Design Allow Access to Difficult Wired Temperature Sensors, Thermo Switches and Other Components.
Easily Removes and Installs Brake Shoe Anchor Springs on Eaton Air Brakes.
Easily Removes and Installs Rear Drum Brake Return Springs.
Allows the Engine Crank to be Manually Adjusted.
Interchangeable Heavy-Duty Cleaning Wands for Radiators and Other Hard-To-Reach Places. Fast and Easy Cleaning Wands for Use with Water or Air.
Angled Tips for Easier Access to Hard-to-Reach Connectors.
The Heavy-Duty Steel Creeper Seat Easily Rolls Across Shop Floors on Four 2" Corrosion Resistant Wheels with Sealed Bearings.
Two Formed Box Holder Bars Fit Different Sized Cardboard Towel Dispenser Boxes.
Keeps Cordless Power Tools Within Easy Reach While Working or for Storage.
Helps Prevent Over Tightening Plastic and Aluminum Oil Filter Canisters and Filters.
Turn Any 3/8" Drive Ratchet or Breaker Bar into a 35 Newton- Meter Torque Wrench.