Skip to main content
Lisle Corporation
Main Content
Just added to your cart:
Price: Quantity:
Merchandise Total:
Thumbnail View SelectedList View Not Selected
Per Page
Showing 1-48 of 48

Easily Remove and Install Wheels on Many European Vehicles with Lug Bolts.

Removes and installs the bearing lock nut on the rear axle of some Chevrolet and GMC vehicles with 9-3/4" DANA 60, 10-1/2" DANA 70 and 10-1/2" GM axles.

Pneumatic Bushing Driver Set Removes and Installs Truck and Trailer 1-3/8" Anchor Pin Bushings and Stuck Anchor Pins.

Drives The Axle Seal Into Place on the Vacuum Operated Front Axles on 1998 to 2004 4-Wheel Drive Ford F-Series Super Duty Trucks.

Durable, impact-grade material. Deep to fit over variable axle lengths. Works where standard sockets won't. Use 1/2" drive.

Durable, impact-grade material. Deep to fit over variable axle lengths. Works where standard sockets won't. Use 1/2" drive.

Removes Inner Tie Rods Equipped with a Completely Round End Socket. Also Fits Inner Tie Rod Sockets with Flats.

For Use on 2002 and Newer Ford SUVs with Independent Rear Suspension.

Loosens bolts and clamps on tie rods for removal or adjustment.

Special Socket Design Applies the Impact Force to the Center of the Frozen Bolt Through the Nose on the Pneumatic Driver.

Use with a Pry Bar to Separate the Lower Control Arm from the Ball Joint Stud.

Threaded Insert.

40mm Crowfoot for GM for 54500

Use 36mm 12 point socket with 3/4" square drive to remove harmonic balancer bolt and re-torque on installation. 36mm 12 point socket can also be used on axle nuts.

For Removing and Installing Shock Nuts.

41650 Caster Camber Holding Tool

Separates the Frozen Hub Assembly from the Steering Knuckle on Dodge and GM pickups, Cadillac, Jeep and Other Applications.

Separates the Frozen Hub Assembly from the Steering Knuckle on Dodge Vehicles.

Now with Steps for Better Gripping.

Now with Steps for Better Gripping.  

 The Extra Deep 15/16" Works Well on the 30/36 Spring Brakes for Autocar, CCC Style Dump Trucks, and Garbage Trucks with MGM Brakes.

41640 Caster Camber Wrench, 21mm & 24mm

Easily Installs New Wheel Studs.

Crimps Ear-Type Clamps in Hard-to-Reach Areas.

Heavy Duty Puller Works on Most Cars & Trucks.

Installs Most Truck Wheel Studs in Seconds.

Works on many applications.

The 14-1/2" 21mm Wrench can be Used from Bottom Side of Vehicle to Move Hard-to-Reach and Often Rusty OEM Cams on 1999 and Newer GM Vehicles with Coil Spring Front Suspensions.

**SUPERSEDED to #41630 Caster Camber Kit for GM, 21mm & 24mm**

The 14-1/2" 21mm/24mm Wrench can be Used to Move Hard-to-Reach and Often Rusty OEM Cams on 1999 and Newer GM 1/2 and 3/4 Ton Vehicles with Coil Spring Front Suspensions.

Separates the Frozen Hub Assembly from the Steering Knuckle on Dodge Vehicles.

For 2005 and Later Ford F250 & F350.

Disconnects quick connect push-in connectors found on heavy-duty truck air systems and more.

For Separating Ball Joints, Tie Rods, Pitman Arms and Other Uses.

Step Design Helps Keep Tool from Bouncing Back When Separating Ball Joints, Steering Dampeners, Tie Rods, Pitman Arms and Other Applications.

Hub Remover Plate.

Easily Remove and Install Wheels on Vehicles with Lug Bolts.

Pneumatic Bushing Driver Set Removes and Installs Truck and Trailer 1-3/8" Anchor Pin Bushings and Stuck Anchor Pins.

Works On Inner Tie Rods With Inaccessible Wrench Flats On Many Trucks and SUVs.

For MacPherson Strut Springs Only.

Works on Tie Rods With Inaccessible Flats. Includes an Additional 1-1/2"Crows Foot for Chevrolet Colorado and GMC Canyon.

Works on Inner Tie Rods with Inaccessible Wrench Flats.

Step Design on the Forks Keeps the Tool from Bouncing Back when Separating Ball Joints, Steering Dampeners, Tie Rods, Pitman Arms and Other Applications.

Time Saving Tool That Safely Removes Frozen Hub Assemblies Without Damaging Other Suspension Components.

The 20% Thicker Fork Design Provides Extra Lift When Replacing Worn Out Ball Joints, Pitman Arms, Pickup Track Bars and Other Applications.

Improved Socket Design to Work on Longer Applications.

© 2024 Lisle Corp. All rights reserved.