Skip to main content
Lisle Corporation
Main Content
Thumbnail View SelectedList View Not Selected
Page of 2
Per Page
Showing 1-24 of 42

Easily Remove and Install Wheels on Many European Vehicles with Lug Bolts.

Used to install many sizes of seals.

Now with Steps for Better Gripping.

Now with Steps for Better Gripping.  

For Removing and Installing Shock Nuts.

Use 36mm 12 point socket with 3/4" square drive to remove harmonic balancer bolt and re-torque on installation. 36mm 12 point socket can also be used on axle nuts.

Easily Installs New Wheel Studs.

Removes and installs the bearing lock nut on the rear axle of some Chevrolet and GMC vehicles with 9-3/4" DANA 60, 10-1/2" DANA 70 and 10-1/2" GM axles.

Pneumatic Bushing Driver Set Removes and Installs Truck and Trailer 1-3/8" Anchor Pin Bushings and Stuck Anchor Pins.

Installs Most Truck Wheel Studs in Seconds.

Pneumatic Bushing Driver Set Removes and Installs Truck and Trailer 1-3/8" Anchor Pin Bushings and Stuck Anchor Pins.

Crimps Ear-Type Clamps in Hard-to-Reach Areas.

Drives The Axle Seal Into Place on the Vacuum Operated Front Axles on 1998 to 2004 4-Wheel Drive Ford F-Series Super Duty Trucks.

Separates the Frozen Hub Assembly from the Steering Knuckle on Dodge Vehicles.

Separates the Frozen Hub Assembly from the Steering Knuckle on Dodge Vehicles.

Separates the Frozen Hub Assembly from the Steering Knuckle on Dodge and GM pickups, Cadillac, Jeep and Other Applications.

Durable, impact-grade material. Deep to fit over variable axle lengths. Works where standard sockets won't. Use 1/2" drive.

Durable, impact-grade material. Deep to fit over variable axle lengths. Works where standard sockets won't. Use 1/2" drive.

The 20% Thicker Fork Design Provides Extra Lift When Replacing Worn Out Ball Joints, Pitman Arms, Pickup Track Bars and Other Applications.

The 14-1/2" 21mm Wrench can be Used from Bottom Side of Vehicle to Move Hard-to-Reach and Often Rusty OEM Cams on 1999 and Newer GM Vehicles with Coil Spring Front Suspensions.

Step Design Helps Keep Tool from Bouncing Back When Separating Ball Joints, Steering Dampeners, Tie Rods, Pitman Arms and Other Applications.

Step Design on the Forks Keeps the Tool from Bouncing Back when Separating Ball Joints, Steering Dampeners, Tie Rods, Pitman Arms and Other Applications.

For Separating Ball Joints, Tie Rods, Pitman Arms and Other Uses.

Heavy Duty Puller Works on Most Cars & Trucks.

Previous
of 2
Showing 1-24 of 42
© 2019 Lisle Corp. All rights reserved.