Skip to main content
Lisle Corporation
Main Content
Just added to your cart:
Price: Quantity:
Merchandise Total:
Thumbnail View SelectedList View Not Selected
Per Page
Showing 1-61 of 61

Designed for Easy Access on NOx and Soot Sensors.

This Heavy-Duty Impact Socket is Designed with More Than Three Times the Standard Socket Mass to Direct More Energy to Removing the Bolt.

Helps Locate Air Leaks in the Components by Plugging the Output Side of the Turbo and the Intake Inlet.

Helps Locate Air Leaks in Turbo System Components by Plugging the Output Side of the Turbo and the Intake Inlet.

A Three Step Kit for Removing Spark Plugs that have Seized in the Engine Head and Broken. 

Flexible Silicone Probe Bends for Hard-to-Reach Areas. Great for Harness Connectors and Sensor Wiring. 

Used to Remove Stubborn Spark Plug Wires.

Used to Remove Stubborn Spark Plug Wires on GM 3.1L, 3.4L, 3.8L and Other Engines. 

Gives a Visual Check of Spark Energy for Coil On Plug or Standard Ignition Systems.

64630 Bolt, 1/2"-13 x 1.75

64620 Tube Seal Installer

64610 Tube Seal Installer

Used to Replace Seals in Valve Covers on Honda® 2.4 and 3.5L Engines.

Cleans Threads in Soot Sensor Holes.

Thin Wall, 16mm, 12 pt. Socket with Swivel to Remove and Replace Spark Plugs from Narrow Tubes.

Two Pulling Positions Help Make Removing Spark Plug Wires A Safe And Easy Job.

Thin Wall, 14mm, 12 pt. Socket with Swivel to Remove and Replace Spark Plugs from Narrow Tubes.

Includes T-Adapter for Connecting Smoke Machines to Help Locate Air Leaks in the Components.

Includes T-Adapter for Connecting Smoke Machines to Help Locate Air Leaks in the Components.

Cleans Threads in NOx Sensor Holes.

Designed with a 4" Offset for Holding the Damper when Removing and Installing the Crank Bolt on Many Honda and Acura Engines.

Detects Combustion Leaks on Diesel Engines.

Quickly Pinpoints Combustion Leaks.

Comes with 75000 Vacuum Pump and Complete Accessories for Vacuum Testing and Brake Bleeding.

Check all vacuum operated components on vehicles.

Kit Makes Testing Relays or Live Circuits Quick and Easy

Provides Easy Access to Check Current or Voltage on Nearly All of the Fuses and Relays Used on Vehicles Today. 

A 9" flexible shaft with 3/8" square drive for starting and removing fasteners in hard-to-reach locations.  

Used to Start and Remove Spark Plugs in Deeply Recessed Holes.  

Includes 8 Jumpers to Fit Most Popular Relays. Also Includes Test Lead Kit and Relay Puller Pliers.

This set checks fuel pressure on most domestic (except GM TBI) and Japanese Fuel Injection and Throttle Body Injection Systems.

Extended 3" Long T-55 Torx® bit for Use on Head Bolts on Chrysler 2.4L New World Engines.

Test All Types of Fuel Injection Systems.

For Adjusting Idle / Mixture Screws on GM and Chrysler.

Two Pulling Positions Help Make Removing Spark Plug Wires A Safe And Easy Job.

Dual Purpose Set Detects Both Mechanical and Air Induced Sounds.

Detects Noise From Vacuum Leaks, Exhaust Leaks, Wind Noise and Air Leaks.

Unique Sound Chamber and Super Thin Diaphragm Greatly Amplifies Sounds.

Jaws Adjust to Five Positions.

Also Pulls Cartridge Fuses.

Nylon Stops the Shocks and Beats the Heat and Burns.

Removes Spark Plug Wire Boots from Plugs.

Quickly Checks Spark at Plug Wire.

Holds Throttle at a Constant RPM.

Redesigned for Newer 3.5L and 3.6L GM Engines. Also Works on GM V6 2.8L, 3.1L and 3.4L.  

Also for "E" clips and other small parts.

For Servicing the Timing Belt, Chains, Head Gaskets or Other Valve Train Repairs on Ford, Mercury and Mazda Vehicles.

Locks Camshaft Sprockets in Place During Belt / Chain Replacement.

Sold Two Per Set.

Tough, Smooth-working Reliable Switch.

Provides an Easy Way to Check Ignition Systems with Coil-On Plugs. Applications Include Ford, Chrysler, Mitsubishi, Nissan and More.

12mm Spark Plug Adapters for 20250 Compression Tester.

Gives a Visual Check of the Ignition System.

10mm Spark Plug Adapters for 20250 Compression Tester.

For Use with 20250 Compression Tester.

Quickly and Accurately Check Compression on Gasoline Engines.

Double-Ended for Both 14mm & 18mm Threads.

Fits Spark Plug Holes with Limited Access.

The Narrow Profile Allows Access to Spark Plug Holes in Confined Spaces.

Tests Spark Plugs, Spark Plug Wires and Coils Without Puncturing the Wire.

© 2024 Lisle Corp. All rights reserved.