Skip to main content
Lisle Corporation
Main Content
Just added to your cart:
Price: Quantity:
Merchandise Total:
Thumbnail View SelectedList View Not Selected
Page of 2
Per Page
Showing 1-36 of 61

Gives a Visual Check of Spark Energy for Coil On Plug or Standard Ignition Systems.

64630 Bolt, 1/2"-13 x 1.75

64620 Tube Seal Installer

64610 Tube Seal Installer

Used to Replace Seals in Valve Covers on Honda® 2.4 and 3.5L Engines.

Cleans Threads in Soot Sensor Holes.

Thin Wall, 16mm, 12 pt. Socket with Swivel to Remove and Replace Spark Plugs from Narrow Tubes.

Two Pulling Positions Help Make Removing Spark Plug Wires A Safe And Easy Job.

Thin Wall, 14mm, 12 pt. Socket with Swivel to Remove and Replace Spark Plugs from Narrow Tubes.

Includes T-Adapter for Connecting Smoke Machines to Help Locate Air Leaks in the Components.

Includes T-Adapter for Connecting Smoke Machines to Help Locate Air Leaks in the Components.

Designed for Easy Access on NOx and Soot Sensors.

Cleans Threads in NOx Sensor Holes.

Designed with a 4" Offset for Holding the Damper when Removing and Installing the Crank Bolt on Many Honda and Acura Engines.

This Heavy-Duty Impact Socket is Designed with More Than Three Times the Standard Socket Mass to Direct More Energy to Removing the Bolt.

Detects Combustion Leaks on Diesel Engines.

Quickly Pinpoints Combustion Leaks.

Comes with 75000 Vacuum Pump and Complete Accessories for Vacuum Testing and Brake Bleeding.

Check all vacuum operated components on vehicles.

Helps Locate Air Leaks in the Components by Plugging the Output Side of the Turbo and the Intake Inlet.

Helps Locate Air Leaks in Turbo System Components by Plugging the Output Side of the Turbo and the Intake Inlet.

Kit Makes Testing Relays or Live Circuits Quick and Easy

Provides Easy Access to Check Current or Voltage on Nearly All of the Fuses and Relays Used on Vehicles Today. 

A Three Step Kit for Removing Spark Plugs that have Seized in the Engine Head and Broken. 

Flexible Silicone Probe Bends for Hard-to-Reach Areas. Great for Harness Connectors and Sensor Wiring. 

A 9" flexible shaft with 3/8" square drive for starting and removing fasteners in hard-to-reach locations.  

Used to Start and Remove Spark Plugs in Deeply Recessed Holes.  

Includes 8 Jumpers to Fit Most Popular Relays. Also Includes Test Lead Kit and Relay Puller Pliers.

This set checks fuel pressure on most domestic (except GM TBI) and Japanese Fuel Injection and Throttle Body Injection Systems.

Extended 3" Long T-55 Torx® bit for Use on Head Bolts on Chrysler 2.4L New World Engines.

Test All Types of Fuel Injection Systems.

For Adjusting Idle / Mixture Screws on GM and Chrysler.

Two Pulling Positions Help Make Removing Spark Plug Wires A Safe And Easy Job.

Dual Purpose Set Detects Both Mechanical and Air Induced Sounds.

Detects Noise From Vacuum Leaks, Exhaust Leaks, Wind Noise and Air Leaks.

Unique Sound Chamber and Super Thin Diaphragm Greatly Amplifies Sounds.

Previous
of 2
Showing 1-36 of 61
© 2024 Lisle Corp. All rights reserved.