Skip to main content
Lisle Corporation
Main Content
Just added to your cart:
Price: Quantity:
Merchandise Total:
Thumbnail View SelectedList View Not Selected
Page of 2
Per Page
Showing 1-36 of 61

The Narrow Profile Allows Access to Spark Plug Holes in Confined Spaces.

Also for "E" clips and other small parts.

Nylon Stops the Shocks and Beats the Heat and Burns.

Extended 3" Long T-55 Torx® bit for Use on Head Bolts on Chrysler 2.4L New World Engines.

Used to Start and Remove Spark Plugs in Deeply Recessed Holes.  

A 9" flexible shaft with 3/8" square drive for starting and removing fasteners in hard-to-reach locations.  

Comes with 75000 Vacuum Pump and Complete Accessories for Vacuum Testing and Brake Bleeding.

Designed with a 4" Offset for Holding the Damper when Removing and Installing the Crank Bolt on Many Honda and Acura Engines.

64620 Tube Seal Installer

64630 Bolt, 1/2"-13 x 1.75

Two Pulling Positions Help Make Removing Spark Plug Wires A Safe And Easy Job.

Sold Two Per Set.

10mm Spark Plug Adapters for 20250 Compression Tester.

12mm Spark Plug Adapters for 20250 Compression Tester.

Quickly Checks Spark at Plug Wire.

Fits Spark Plug Holes with Limited Access.

Double-Ended for Both 14mm & 18mm Threads.

Also Pulls Cartridge Fuses.

Detects Combustion Leaks on Diesel Engines.

Cleans Threads in NOx Sensor Holes.

Cleans Threads in Soot Sensor Holes.

For Use with 20250 Compression Tester.

Tests Spark Plugs, Spark Plug Wires and Coils Without Puncturing the Wire.

Removes Spark Plug Wire Boots from Plugs.

Two Pulling Positions Help Make Removing Spark Plug Wires A Safe And Easy Job.

Gives a Visual Check of the Ignition System.

Flexible Silicone Probe Bends for Hard-to-Reach Areas. Great for Harness Connectors and Sensor Wiring. 

64610 Tube Seal Installer

For Adjusting Idle / Mixture Screws on GM and Chrysler.

Used to Remove Stubborn Spark Plug Wires on GM 3.1L, 3.4L, 3.8L and Other Engines. 

Redesigned for Newer 3.5L and 3.6L GM Engines. Also Works on GM V6 2.8L, 3.1L and 3.4L.  

Used to Remove Stubborn Spark Plug Wires.

Thin Wall, 14mm, 12 pt. Socket with Swivel to Remove and Replace Spark Plugs from Narrow Tubes.

Thin Wall, 16mm, 12 pt. Socket with Swivel to Remove and Replace Spark Plugs from Narrow Tubes.

Provides an Easy Way to Check Ignition Systems with Coil-On Plugs. Applications Include Ford, Chrysler, Mitsubishi, Nissan and More.

Detects Noise From Vacuum Leaks, Exhaust Leaks, Wind Noise and Air Leaks.

Previous
of 2
Showing 1-36 of 61
© 2024 Lisle Corp. All rights reserved.