View Gauges

Clear Window View Gauges
Domed View Gauges

CLEAR WINDOW VIEW GAUGES

These view gauges are designed for multiple uses and are made for insertion, into els, tees, or other N.P.T. fittings and are easily installed and removed with a wrench. These rugged units are turned from solid hexagon material and come with a clear glass window firmly held between two gaskets.

Recommended maximum pressures, listed below, allow safe margins for variations in application and installation. Maximum recommended temperature is 250°F. Not for air service.

CLEAR WINDOW WITH OPEN BACK

Steel with Zinc Plating

Nominal Pipe Size	Part  Number	A Stem Length	B Body Length	C Sight Diameter	D Assembly Clearance	Recommended Maximum PSI
3/8" - 18	9037011	0.50	0.31	0.47	1.00	75
1/2" - 14	9047011	0.53	0.35	0.58	1.25	75
3/4" - 14	9057011	0.53	0.36	0.75	1.50	50
1" - 11 1/2	9067011	0.68	0.46	1.00	1.81	25
1 1/4" - 11 1/2	9077011	0.68	0.44	1.17	2.25	10
1 1/2" - 11 1/2	9087011	0.68	0.42	1.61	2.50	10

CLEAR WINDOW WITH REFLECTOR BACK

Steel with Zinc Plating

Nominal Pipe Size	Part Number	A Stem Length	B Body Length	C Sight Diameter	D Assembly Clearance	Recommended Maximum PSI
1/2" - 14	9047021	0.53	0.35	0.58	1.25	75
3/4" - 14	9057021	0.53	0.38	0.75	1.50	50
1" - 11 1/2	9067021	0.68	0.44	1.00	1.80	25
1 1/4" - 11 1/2	9077021	0.68	0.45	1.16	2.25	10
1 1/2" - 11 1/2	9087021	0.68	0.45	1.56	2.50	10

Top

DOMED VIEW GAUGES

Oil level is easy to read from any angle. Outer dome is clear, unbreakable plastic. White plastic inner dome makes oil level stand out in dim light. Maximum recommended operating conditions 10 PSI up to 100°F: 2 PSI up to 160°F. Not for air service.

Steel with Zinc Plating

Nominal Pipe Size	Part Number	A Stem Length	B Body Length	C Sight Diameter	D Assembly Clearance
3/4" - 14	9057031	0.53	0.75	0.93	1.50
1" - 11 1/2	9067031	0.68	0.82	0.93	1.81
1 1/4" - 11 1/2	9077031	0.68	1.00	1.25	2.25

Top